FAQs • Rancho California Water District, CA • CivicEngage

Who can install a backflow device?: Anyone can install a device; however, District approved Riverside County Certified Testers are responsible for performing accurate tests, and repairing or replacing devices that fail. Additionally, testers must report all repairs and test results to Rancho Water. The tester is required to give a copy of the completed test report to the customer and fax it to (951) 296-6865 or send the original to Rancho California Water District: 42135 Winchester Road, Temecula, CA 92590.

▼
Cross-Connection & Backflow Prevention

1. Why do I need a backflow device?: A backflow device would be needed if there is an auxiliary source of water on the property. Commercial, industrial, agricultural, and ag-domestic properties also require backflow protection, or the District can require one to be installed if there is cause to.

2. What regulations govern backflow devices?: Title 17 of California Code of Regulations and the Universal Plumbing Code outline the regulations for backflow devices.

3. Where do I get a backflow device?: Contact a plumber or a backflow tester who has been certified by the County of Riverside and has submitted their certification to the District.

4. What type of device do I need?: The device needed will depend on the degree of hazard determined by the District through a site survey.

5. Who can install a backflow device?: Anyone can install a device; however, District approved Riverside County Certified Testers are responsible for performing accurate tests, and repairing or replacing devices that fail. Additionally, testers must report all repairs and test results to Rancho Water. The tester is required to give a copy of the completed test report to the customer and fax it to (951) 296-6865 or send the original to Rancho California Water District: 42135 Winchester Road, Temecula, CA 92590.

6. How can I protect the backflow device against theft and vandalism?: By installing cages, decorative rock covers, or blending it with shrubbery around the device. Be sure to leave 24 inches of clearance for annual testing. Painting the device may be an option. This can deter thieves since it devalues the metal.